A Fault Message Appears In The Display - Miele PWM 908 Operating And Installation Instructions

A fault message appears in the display

Problem

Container empty

Hygiene info: run the
Maintenance hy-
giene program, or a
program of at least
60°C

Check hot water in-
take

Align the machine.
Laundry not properly
spun

Machine is leaking
1
The messages will appear at the end of the program and when the washing ma-
chine is switched on and needs to be confirmed with the OK sensor control.
Frequently asked questions
Possible cause and solution
One of the external detergent containers is empty.
 Refill the detergent container.
During the last wash, a wash program with a tempera-
ture below 140°F (60°C) or the Drain/Spin program
was selected.
 Start a program with a minimum temperature of
140°F (60°C) or the
gram.
The hot water supply is blocked or restricted.
 Check whether the hot water supply has been
turned on properly.
 Check whether the intake hose is kinked.
The selected spin speed was not reached during the
final spin due to excessive imbalance.
 Check that the washing machine is level.
 Start the spin cycle again.
The washing machine or drain valve is leaking.
 Turn off the water supply.
 Contact Technical Service.
1
Maintenance wash hygiene pro-
57