Remaining Risks; Security Devices - Holzmann SB 3116RHN User Manual

DRILL SPECIFIC SAFETY RULES
Take care to remove the Chuck key from the drill chuck before
turning the machine on.
The drill bit shall not touch the workpiece when turning the ma-
chine on.
Especially workpieces with not even surface have to be clamped
by a vice.
Never change, remove, adjust workpiece while machine is run-
ning.

REMAINING RISKS

The work with a drill press always incorportates some remaining
risks which can never be eliminated entirely and the operator
should be aware of:
Hazard of severe injury when touching the rotating drill bit, drill
chuck or spindle.
Hazard of cutting injury caused by sharp drill edges or sharp
metal chips.
Hazard of injury through material or parts of the workpiece be-
ing catapulted away.

SECURITY DEVICES

The drill press is equipped with an ON/OFF switch with a emer-
gency OFF cap activating the red OFF button when being de-
pressed.
The drill press has an automatic OFF switch which is activated as
long as the drive belt cover is not closed entirely
The drill press is equipped with a chip protection cover which
should be always used when performing drills.