Adjusting The Compression In The Suntour Rear Frame Damper; Adjusting The Compression In The Fox Fork; Adjusting The Compression In The - Bosch BULLS Twenty 6 EVO Translation Of The Original Operating Instructions

Hide thumbs Also See for BULLS Twenty 6 EVO:
Table of Contents

Advertisement

6.16.2 Adjusting the compression in
the Suntour rear frame damper
Only applies to pedelecs with this equipment
The compression adjuster enables you to make
quick adjustments to the suspension behaviour in
the rear frame damper to suit changes in terrain.
It must never be used while riding on rough
terrain.
Figure 75: Suntour compression adjuster open (1)
 Use the OPEN position for rough descents and
the LOCK position for efficient climbing. Set
the compression adjuster to OPEN first.
2
Figure 76: Suntour compression adjuster closed (2)
MY20B01 - 52_1.0_02.10.2019

6.16.3 Adjusting the compression in the

Fox fork
Only applies to pedelecs with this equipment
The compression adjuster makes it possible to
make quick adjustments to the suspension
behaviour of the fork to suit changes in terrain. It
is intended for adjustments made during the ride.
1
Figure 77: FOX compression adjuster with OPEN (1) and
HARD (2) positions
 Compression damping is lowest in the OFFEN
position, making the fork feel softer.
 Use the HARD position if you want the fork to
feel stiffer and you are riding on soft ground.
 The lever positions between the OPEN and
HARD positions provide fine adjustment of
compression damping.
We recommend setting the compression adjuster
lever to the OPEN position first.
Operation
1 1
2
75

Advertisement

Table of Contents
loading

Table of Contents