Transporting And Storing; Physical Transport Characteristics; Dimensions During Transportation; Transport Weight - Bosch BULLS Twenty 6 EVO Translation Of The Original Operating Instructions

4

Transporting and storing

4.1 Physical transport
characteristics
4.1.1

Dimensions during transportation

There was no information relating to the box
dimensions at the time of going to press. You'll
find the information in the latest operating
instructions on the retailer portal.
4.1.2

Transport weight

There was no information relating to the box
dimensions at the time of going to press. You'll
find the information in the latest operating
instructions on the retailer portal.
4.1.3

Designated handles/lifting points

There was no information relating to the box
dimensions at the time of going to press. You'll
find the information in the latest operating
instructions on the retailer portal.
Notice
Oil and grease may leak if the pedelec is lying flat.
If the shipping box with a pedelec is lying flat or
standing on one end, it does not provide the frame
and wheels with adequate protection against
damage.
 Transport the pedelec in an upright position
only.
4.2

Transporting

CAUTION
!
Crash caused by unintentional activation
There is a risk of injury if the drive system is
activated unintentionally.
 Remove the battery.
MY20B01 - 52_1.0_02.10.2019
CAUTION
!
Oil leak if no transport securing device
The brake securing device prevents the brakes
from being applied accidentally during
transportation. This could cause irreparable
damage to the brake system or an oil leak, which
will harm the environment.
 Never push the brake lever when the wheel
has been dismounted.
Always use the transport securing system when
transporting dismounted wheels.
Notice
Bicycle rack systems which use the handlebars or
frame to hold the pedelec in an upside-down
position exert inadmissible forces on its
components during transportation. This can
cause the supporting parts to break.
 Never use bicycle rack systems which use the
pedelec's handlebars or frame to hold it in an
upside-down position.
The specialist dealer will advise you on how to
select a suitable rack system properly and how to
use it safely.
 If you ship the pedelec, we recommend that
you have it partially dismantled and packaged
properly by the specialist dealer.
 Transport the pedelec in a dry, clean position
where it is protected from direct sunlight.
 Take into account the weight of the ready-to-
use pedelec when transporting it.
 Remove the display screen and the batteries
before transporting the pedelec.
 Protect the electrical components and
connections on the pedelec from the weather
conditions with suitable protective covers.
 Remove accessories such as drinking bottles
before transporting the pedelec.
 When transporting by car, you must use a
suitable bicycle rack system.
Transporting and storing
35