Function Display; Gear Recommendation; Tachometer Screen - Bosch BULLS Twenty 6 EVO Translation Of The Original Operating Instructions

Hide thumbs Also See for BULLS Twenty 6 EVO:
Table of Contents

Advertisement

3.6.3.3 Function display

The last setting is always displayed on the
function display screen by default.
The control panel with display shows one of three
items of journey information. The displayed item
of journey information can be switched
Screen display
Function
T R IP
Distance travelled since the last RESET
T O T AL
Display of the total distance travelled
(cannot be changed)
R AN G E
Estimated range for the available battery
charge, calculated based on the most
recent riding mode.
Table 32: Journey information
System data
To view all the information on the system being
used and the software, the rider has to call up the
system data.
Screen display
Function
S ERI AL NU MB ER DU
Drive system serial number
S ERI AL N UM BER H MI Serial number for control panel with
display
S W VE RSI O N HM I
Software version of the control
panel with display
S W VE RSI O N DU
Drive system software version
S W VE RSI O N PP
Battery software version
Table 33: System data, not changeable
System message
The drive system monitors itself continuously and
if an error is detected, it is indicated by a system
message. The system may switch off
automatically depending on the type of error.
There is a table of system messages in the
appendix
Figure 24: The left battery is currently being charged
MY20B01 - 52_1.0_02.10.2019

3.6.3.4 Gear recommendation

Pedalling frequencies higher than 50 revolutions
per minute optimise drive unit efficiency.
However, very slow pedalling uses up a great deal
of energy. You can increase the speed and range
while applying the same force by selecting the
right gear. It is therefore best to follow gear
recommendations.
The gear recommendation function reacts to
excessively slow or excessively quick pedalling
and recommends a change of gear.
The gear recommendation function has to be
switched on in the system settings.
Symbol
Use
Pedalling frequency is too high, a higher gear is
recommended
Pedalling frequency is too low, a lower gear is
recommended
Table 34: Symbols of the gear recommendation function

3.6.3.5 Tachometer screen

The tachometer shows the current speed at all
times.
You can select whether the speed is displayed in
kilometres or miles in the system settings.
3.6.3.6 Function display
The function display shows texts and readings.
Three different types of information are shown:
Journey information
System settings and data, and
System messages.
Overview
31

Advertisement

Table of Contents
loading

Table of Contents