Starting The Ls300 - Sierra Wireless AirLink LS300 User Manual

AirLink LS300 User Guide
24

Starting the LS300

Upon receiving power, the device automatically starts as shown by the flashing
LEDs. If it does not turn on, see that the:
• Power connector is plugged in
• Power cable is connected to power (line or battery power)
• Power is turned on or that the battery is fully charged
• Ignition Sense (pin 3) is connected to the battery or power source (see
Connector Description
After the initial power up, to see if the device is properly connected and operating
correctly:
1. In the laptop connected to the device, open a web browser.
2. In the browser's address bar, enter the IP address:
http://192.168.13.31:9191.
Note: It takes the device 2 – 3 minutes to respond after power up.
3. The ACEmanager login screen appears. Enter your user name and
password. The administrator user name is user and password is 12345.
Figure 2-9: ACEmanager Login Screen
4. The ACEmanager homepage appears
on page 15 for details)
Power
4112895