Din Rail Mount - Sierra Wireless AirLink LS300 User Manual

Rev 4 Apr. 13
2
1
6 mm (0.24 in.)
Figure 2-6: LS300 Mounting Bracket for flat surfaces
To mount the LS300 on a flat surface using the mounting bracket:
1. Line up the LS300 with either set 1 or set 2 holes, depending on the desired
orientation. (See Figure
2. Attach the LS300 to the bracket with the three mounting screws.
3. Attach the bracket/LS300 combination to the mounting surface.
4. Connect the bracket to ground (the battery or power source negative
terminal) by connecting a grounding strap under one of the mounting bracket
screws. This provides protection from electrostatic discharges.

DIN Rail Mount

If you are mounting the LS300 on a DIN rail, order mounting bracket kit
P/N 6000558 (DIN Rail Mounting Bracket for LS300) from Sierra Wireless. The kit
contains:
• L-shaped DIN Rail Mounting Bracket—Qty 1
• DIN Rail Clip (35 mm EN 50022)—Qty 1
• Screw M3—Qty 4
1
2
1
2
106 mm
(4.17 in.)
Top view
119 mm
(4.68 in.)
89 mm
(3.50 in.)
Side view
2-6.)
Installation and Startup
10 mm (0.39 in.)
60 mm
(2.36 in.)
21