Ipv6 Wan Setting - Planet WGR-500-4P User Manual

4.3.6

IPv6 WAN Setting

This page is used to configure parameter for IPv6 internet network which connects to WAN port of your industrial
wall-mount Gigabit router as shown in
of the router's WAN. In this setting you may change WAN origin type and WAN Link type.
Object
Enable IPv6
Origin Type
WAN Link Type
User's Manual of WGR-500-4P and WGR-500-4PV
Figure 4-32. It allows you to enable IPv6 function and set up the parameters
Figure 4-32: IPv6 WAN setup
Click this box to enable IPv6 configuration.
Select either Auto or Static. In Auto you could choose the DHCP type for
Stateless Address Auto or Stateful Address Auto Configuration. In Static you
need to fill in the Static IP address table.
Select IPv6 WAN type either by using Ethernet or PPPoE.
61
Description