Planet WGR-500-4P User Manual page 69

Object
Enable QoS
Automatic Uplink Speed
Automatic Downlink Speed
Name
QoS Type
Protocol
Select IP
Local IP Address
Local Port
Remote IP Address
Remote Port
IPv6 Address
MAC Address
PHYPORT
DSCP
Mode
Uplink Bandwidth
Downlink Bandwidth
remark dscp
Comment
User's Manual of WGR-500-4P and WGR-500-4PV
Check the box to enable the QoS function.
Check the box to adjust the uplink speed automatically by the Industrial
wall-mount Gigabit router. Or enter the uplink data rate manually in the field
below.
Check the box to adjust the downlink speed automatically by the Industrial
wall-mount Gigabit router. Or enter the downlink data rate manually in the
field below.
Add a QoS rule name.
Choose type of QoS either by IPv4, MAC Address, IPv6, PHYPORT or
DSCP.
Select type of protocol to use for QoS. It can be either TCP, UDP or both.
Select connected client IP Address.
Enter local IP Address range of client or device (if QoS type is IPv4).
Enter local port range of client or device (if QoS type is IPv4).
Enter remote IP Address range of client or device (if QoS type is IPv4).
Enter remote port range of client or device (if QoS type is IPv4).
Enter IPv6 Address of client or device (if QoS type is IPv6).
Enter MAC Address of client or device (if QoS type is MAC).
Enter Physical Ethernet port of connected client or device (if QoS type is
PHYPORT).
Enter DSCP number of client or device (if QoS type is DSCP).
Select QoS mode for "Guaranteed minimum bandwidth" or "Restricted
maximum bandwidth".
Enter value of upload limitation value according to the QoS mode.
Enter value of download limitation value according to the QoS mode.
Insert a remark on DSCP configuration.
Insert comment of the DSCP configuration as references.
69
Description