Planet WGR-500-4P User Manual page 38

Step 3: Time Zone Setting
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal
system clock. Daylight Saving can also be configured to automatically adjust the time when needed.
The setup is shown in Figure 4-9
Object
Enable NTP client update
Automatically Adjust Daylight
Saving
Time Zone Select
NTP Server
Step 4: LAN Interface Setting
Set up the IP Address and Subnet Mask for the LAN interface as shown in
Object
IP Address
Subnet Mask
User's Manual of WGR-500-4P and WGR-500-4PV
Figure 4-9: Setup Wizard – Time Zone Configuration
Check this box to connect NTP server and synchronize internet time.
Check this box to adjust the daylight saving automatically.
Select the Time Zone from the drop-down menu.
Select the NTP server from the drop-down menu.
Figure 4-10: Setup Wizard – LAN Configuration
Enter the IP address of your Router. The default:
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
38
Description
Figure 4-10.
Description
192.168.1.1