Planet WGR-500-4P User Manual page 40

Mode 2 DHCP Client
Select DHCP Client to obtain IP Address information automatically from your ISP. The setup is shown in
4-13.
Mode 3 PPPoE
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will
provide you with a username and password. This option is typically used for DSL services. The setup is shown in
Figure 4-14.
Object
User Name
Password
User's Manual of WGR-500-4P and WGR-500-4PV
Figure 4-13: WAN Interface Setup – DHCP Setup
Figure 4-14: WAN Interface Setup – PPPoE Setup
Enter your PPPoE user name.
Enter your PPPoE password.
40
Description
Figure