Planet WGR-500-4P User Manual page 41

Mode 4 PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol) if your ISP uses a PPTP connection. Your ISP will provide
you with IP information and PPTP Server IP Address; of course, it also includes a username and password. This
mode is typically used for DSL services. The setup is shown in
Object
IP Address
Subnet Mask
Server IP Address
User Name
Password
User's Manual of WGR-500-4P and WGR-500-4PV
Figure 4-15: WAN Interface Setup – PPTP Setup
Enter the IP address.
Enter the subnet Mask.
Enter the PPTP Server IP address provided by your ISP.
Enter your PPTP username.
Enter your PPTP password.
41
Figure 4-15.
Description