Route - Planet WGR-500-4P User Manual

4.3.4

Route

There are two route types that are Dynamic Route and Static Route. Please refer to the following sections for the
details as shown in Figure 4-29.
■ Dynamic routing
Dynamic routing is a networking technique that provides optimal data routing. Unlike static routing, dynamic
routing enables routers to select paths according to real-time logical network layout changes. RIPng exchanges
routing information used to compute routes and is intended for IP version 6 (IPv6)-based networks while RIPv1
and RIPv2 is intended for IP version 4 (IPv4)-based networks.
Object
Enable Dynamic Route
NAT
RIP Send
RIP Recv
RIPng
User's Manual of WGR-500-4P and WGR-500-4PV
Figure 4-29: Routing setup
Click this box to enable Dynamic Route.
Enable or Disable NAT function
Disable:do not send any RIP packet out
RIP1: Send RIP1 packet out
RIP2. Send RIP2 packet out
Disable：do not receive any RIP packet
RIP1: Only receive RIP1 packet
RIP2: Only receive RIP2 packet
Enable or Disable RIPng function
57
Description