Routing; Static Route - Planet ADE-3400 User Manual

Adsl 2/2+ router

Hide thumbs Also See for ADE-3400:

Table of Contents

3.6.2 Routing

Choose Advance > Routing , the page shown in the follo wing figure appears. The p age

that is displayed contains RIP and Static Route.

Click Static Route in the lef t pane, the p age shown in the following figure appears. This

page is used to configure the routing information. You can add or delete IP routes.

The following table describes the parameters and buttons of this page:

Field

Enable

Destination

Subnet Mask

Next Hop

Metric

Interface

Add Route

Update

Description

Select it to use static IP routes.

Enter the IP address of the destination device.

Enter the subnet mask of the destination device.

Enter the IP address of the next hop in the IP route to

the destination device.

The metric cost for the destination.

The interface for the specified route.

Click it to add the new static route to the Static Route

Table.

Select a row in the Static Route Table and modify the

parameters. Then click it to save the settings

temporarily.

Table of Contents