Gsm-4S Module Features - Satel GSM-4S User Manual

2
1. GSM-4S
MODULE FEATURES
• Simulation of analog telephone line by the use of cellular connection – which makes it
possible to report an alarm situation at the site in case the analog line is out of order or
missing.
• Operation with alarm control panels and with other equipment (e. g. DT-1 telephone set)
using the telephone line for transmitting voice information about the alarm, or for sending
text messages to paging system.
• Operation in conjunction with the STAM-1/STAM-2 monitoring station, which makes
monitoring of the sites possible with the use of SMS short messages.
• Function of an external modem for the INTEGRA alarm control panels (support of
DLOADX and GUARDX programs) and the CA-64 alarm control panels (support of
DLOAD64 and GUARD64 programs)*.
• Answering incoming and making outgoing calls via cable telephone network and via
mobile communication system (cellular network).
• Optional selection of the basic outgoing line: GSM/cable (subscriber line).
• Signaling of answering (receiving) a call initiated from the module T-1, R-1 terminals by
changing the voltage polarization across those terminals (possibility of tariffication).
• Operation with PBX telephone exchange as additional subscriber's line.
• Pulse and tone dialing modes.
• Substitution of the direct access to cable telephone network and the access to cable
telephone network via PBX.
• Four inputs, the violation of which (and restoring to normal status) can be monitored by
SMS messages, voice messages or CLIP.
• Three outputs for controlling the electrical devices (e. g. by relays directly connected to the
module).
• Output for signaling the telephone line failure and the cellular line failure.
• Test messaging (monitoring) in order to confirm the module operative condition
• Possibility to control the outputs activity by violating the inputs (e.g. tripping alarm device
after actuation of an alarm sensor) or by CLIP.
• Remote controlling of the status of module's outputs and bypassing of the module inputs
by using SMS text message or dual tone phone push-buttons (DTMF Signals).
• Capability of recognizing the message directed to paging system and transmitting it in the
form of SMS text message to any cellular telephone number. SMS messages are always
sent, irrespective of availability of subscriber's telephone line.
• Possibility of restricting the access to cellular telephone by making connections to 32
precisely defined numbers, or reduction of available numbers by assigning initial digits to
such numbers.
• Operation with SIM300CZ three-range professional cellular telephone, compatible with
GSM 900/1800/1900 Mhz networks.
• Checking for cellular telephone availability and for antenna signal level.
• Remote programming of the module from PC computer by using the DLOAD10 program.
• RS interface (connecting to computer, INTEGRA or CA-64).
• GPRS monitoring, including the GSM-4S module status and/or control panel events
(simulation of telephone monitoring station reading events in DTMF formats).
• Answering the user CLIP (by means of a CLIP, SMS or VOICE message).
*
– function available for the CA-64 control panel with v1.04.03 program and DLOAD64 v1.04.04 and GUARD64
v1.04.03 programs (or later versions).
User Manual GSM-4S