SATEL
1. GSM LT-2
MODULE FEATURES
Simulation of analog telephone line when using the GSM connection.
Built-in industrial GSM telephone working in 850/900/1800/1900 MHz cellular telephony
networks.
Capability of remotely checking the status of available resources and the account validity
of SIM card installed in the module.
4 programmable hardwired inputs (NO, NC) to supervise the status of external devices.
Bypassing module inputs by means of:
inputs,
telephone keypad (DTMF),
SMS messages,
D
10 program.
LOAD
Capability of determining the telephone numbers authorized for DTMF or SMS control.
An output to signal the telephone line trouble and/or problem with logging into GSM
network.
Messaging about the module related events to 4 telephone numbers in the form of:
SMS message,
CLIP service (toll-free).
Reporting the module related events to two monitoring stations in Contact ID or Ademco
Express format.
Conversion and retransmission of event codes received from other devices (simulation of
the telephone monitoring station).
Several ways to send event codes to the monitoring station:
GPRS transmissions (encrypted),
CSD transmissions,
SMS messages,
AUDIO transmissions.
Defining the priority of different ways to report events.
Capability of storing up to 255 events generated by the module or received from the
control panel (modules with built-in GSM u-blox LEON-G100 telephone).
Capability of converting the PAGER type text messages into SMS messages.
Caller identification.
Module programming:
locally: landline telephone connected to the R-1 and T-1 terminals or computer with
the D
10 program installed, connected to the module RS-232 port;
LOAD
remotely: computer with the D
GPRS.
RS-232 port to allow:
local programming by means of computer with the D
connection to the alarm control panel or computer as an external modem;
integration with the INTEGRA control panel;
working in conjunction with the STAM-1 / STAM-2 monitoring station;
updating the module firmware.
GSM LT-2
10 program installed, connecting by means of
LOAD
10 program installed;
LOAD
3