Interactive Installation Example - Sun Oracle Netra SPARC T4-1B Product Notes

archive_location nfs
129.148.94.249:/export/install/media/solaris/builds/s10u9/flar/la
test.flar
# Disk layouts
#
partitioning explicit
filesys rootdisk.s0
filesys rootdisk.s1

Interactive Installation Example

In an interactive installation, you are asked to specify one or more drives as the
targets for the OS installation. This step ensures that enough storage capacity is
provided for the installation. For this step, specify the drive with the WWN value
corresponds to the drive on which you want to install the software.
These WWN values are illustrated in the following interactive example. The drive
selected as the installation target is located in drive slot 0, the default boot location.
Note – If you prefer to use some other disk, you can specify it instead of the one in
HDD slot 0.
_ Select Disks_________________________________________________________________
On this screen you must select the disks for installing Solaris software. Start
by looking at the Suggested Minimum field; this value is the approximate space
needed to install the software you've selected. Keep selecting disks until the
Total Selected value exceeds the Suggested Minimum value.
NOTE: ** denotes current boot disk
Disk Device
=============================================================================
[ ] c0t5000C50005C15803d0
[X] c0t5000C50033438DBBd0
______________________________________________________________________________
Esc-2_Continue F3_Go Back
12 Netra SPARC T4-1B Server Module Product Notes • February 2013
Total Selected: 286090 MB
Suggested Minimum: 5032 MB
F4_Edit
free /
8192 swap
Available Space
286090 MB
286090 MB (F4 to edit)
F5_Exit F6_Help