Message From Cpustat Refers To Processor Documentation Incorrectly (Cr 7046898); The Reboot Disk Command Occasionally Fails When Disk Argument Picks Up Extra Characters (Cr 7050975) - Sun Oracle Netra SPARC T4-1B Product Notes

Workaround: Disable the fault management daemon before running the cfgadm
unconfigure command.
# svcadm disable fmd
# ps -ef |grep fmd
...
# cfgadm -c unconfigure PCI-EM0
After completing the cfadm task, re-enable the fault management daemon.
# svcadm enable fmd
Message From cpustat Refers to Processor
Documentation Incorrectly
(CR 7046898)
A message displayed by the cpustat command says:
See the "SPARC T4 User's Manual" for descriptions of these events.
Documentation for Sun processors can be found at:
http://www.sun.com/processors/manuals
The document and website listed in this message are not available.
The reboot disk Command Occasionally Fails
When disk Argument Picks Up Extra Characters
(CR 7050975)
When running the reboot disk command, extraneous characters are occasionally
added to the disk argument before it reaches the OBP. This situation results in a
failure to boot.
Recovery Action: Repeat the boot request.
Known Product Issues 25