Correlate Wwn Device Names With Physical Locations (Probe- Scsi-All Command) - Sun Oracle Netra SPARC T4-1B Product Notes

Label
---------- ----------------------
/SYS/HDD0
/SYS/HDD1
3. Use the output under the Label and Disk Name columns to correlate a drive's
physical location with its corresponding logical device name.
For this server module:
■
■
In this example, the drive installed in slot 0 has a logical device name of
c0t5000C50033438DBBd0.
Note – The diskinfo command provides a variety of disk information depending
on the command options you specify. For more information, type diskinfo -h and
refer to the diskinfo(1M) man page.
▼ Correlate WWN Device Names With Physical
Locations (probe-scsi-all Command)
If you have access to the OS, you might be able to use the diskinfo command
instead. See
Command)" on page
1. At the ok prompt, type
{0} ok probe-scsi-all
/pci@400/pci@1/pci@0/pci@c/LSI,sas@0 <===== SAS Controller
FCode Version 1.00.54, MPT Version 2.00, Firmware Version
5.00.17.00
Target 9
Unit 0
300 GB
SASDeviceName 5000c50033438dbb
PhyNum 0 <=HD,slot 0
Target b
Unit 0
300 GB
10 Netra SPARC T4-1B Server Module Product Notes • February 2013
Disk name
c0t5000C50033438DBBd0
c0t5000C50005C15803d0
/SYS/HDD0 represents a drive in slot 0.
/SYS/HDD1 represents a drive in slot 1.
"Correlate WWN Device Names With Physical Locations (diskinfo
9.
Disk SEAGATE ST930003SSUN300G 0B70
Disk SEAGATE ST930003SSUN300G 0468
Vendor Product
-------- ---------------- ----
SEAGATE ST930003SSUN300G 0B70
SEAGATE ST930003SSUN300G 0468
585937500 Blocks,
SASAddress 5000c50033438db9
585937500 Blocks,
Vers