During A Reboot After An Unrecoverable Hardware Error, Cpus Might Not Start (Cr 7075336); Blue Led On Drive Does Not Light When The Drive Is Ready To Remove (Cr 7082700) - Sun Oracle Netra SPARC T4-1B Product Notes

Server module
Hide thumbs Also See for Netra SPARC T4-1B:
Table of Contents

Advertisement

Workaround: Schedule a replacement of the enclosure (motherboard). For additional
information about this issue, search for message ID SUN4V-8002-WY at My Oracle
Support: http://support.oracle.com.
During a Reboot After an Unrecoverable
Hardware Error, CPUs Might Not Start
(CR 7075336)
In rare cases, a server or sever module might experience a serious problem that
results in a panic. When the server or server module is rebooted, a number of CPUs
might not start, even though the CPUs are not faulty.
Here is an example of the type of error displayed:
rebooting...
Resetting...
ERROR: 63 CPUs in MD did not start
Workaround: Log into Oracle ILOM on the SP and power cycle the host.
-> stop /SYS
Are you sure you want to stop /SYS (y/n)? y
Stopping /SYS
-> start /SYS
Are you sure you want to start /SYS (y/n) ? y
Starting /SYS
Blue LED on Drive Does Not Light When the
Drive Is Ready to Remove (CR 7082700)
When you attempt to unconfigure a drive for removal, the drive's blue Ready to
Remove LED might not light. This situation occurs after you replace a drive in a slot
with a drive that has a different WWN.
Workaround: If you inserted a drive after booting the server, reboot the server for the
Ready to Remove LED to work properly.
Known Product Issues
17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Netra SPARC T4-1B and is the answer not in the manual?

Questions and answers

Table of Contents