E1000G Driver Generates Spurious Ereports When Installing Oracle Solaris Os Over A Sun Pcie Dual Gigabit Ethernet Adapter (Cr 6958011); When Diag-Switch? Is Set To True, Oracle Solaris Os Fails To Update The Eeprom For Automatic Rebooting (Cr 6982060) - Sun Oracle Netra SPARC T4-1B Product Notes

e1000g Driver Generates Spurious ereports
When Installing Oracle Solaris OS Over a Sun
PCIe Dual Gigabit Ethernet Adapter (CR 6958011)
When installing the Oracle Solaris OS on domains controlled through Sun PCIe Dual
Gigabit Ethernet (UTP or MMF) adapters, the e1000g driver might generate false
error reports on the static direct I/O (SDIO) and primary domains. For example:
date time ereport.io.pciex.tl.ca nvlist version: 0
ena = 0x298a9f62243802
detector = (embedded nvlist)
nvlist version: 0
scheme = dev
device-path = /pci@400/pci@1
(end detector)
class = ereport.io.pciex.tl.ca
dev-status = 0x2
ue-status = 0x8000
ue-severity = 0x62030
adv-ctl = 0xf
source-id = 0x600
source-valid = 1
__ttl = 0x1
__tod = 0x4c058b2e 0x1e8813a0
Workaround: You can safely ignore these ereports.
When diag-switch? is Set to true, Oracle
Solaris OS Fails to Update the EEPROM for
Automatic Rebooting (CR 6982060)
When installing the Oracle Solaris OS while the OBP diag-switch? parameter is set
to true, the OS installer fails to update the bootdevice parameter with the new
device path where the OS was installed. Therefore, this new device path will not be
used during the subsequent automatic system reboots.
20 Netra SPARC T4-1B Server Module Product Notes • February 2013
ena = 0x298a9f62243802