Otto Bock 2R10 Instructions For Use Manual page 10

5.1 Liability
The manufacturer will only assume liability if the product is used in accor-
dance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregard of
this document, particularly due to improper use or unauthorised modification
of the product.
5.2 CE conformity
This product meets the requirements of the European Directive 93 / 42 / EEC
for medical devices. This product has been classified as a class I device
according to the classification criteria outlined in Annex IX of the directive.
The declaration of conformity was therefore created by the manufacturer
with sole responsibility according to Annex VII of the directive.
5.3 Warranty
The manufacturer warrants this device from the date of purchase� The
warranty covers defects that can be proven to be a direct result of flaws
in the material, production or construction and that are reported to the
manufacturer within the warranty period�
Further information on the warranty terms and conditions can be obtained
from the competent manufacturer distribution company.
Date de la dernière mise à jour: 2015-06-10
• Veuillez lire attentivement l'intégralité de ce document avant d'utiliser
le produit.
• Respectez les consignes de sécurité afin d'éviter toute blessure et en-
dommagement du produit.
• Apprenez à l'utilisateur à bien utiliser son produit et informez-le des
consignes de sécurité.
• Conservez ce document.
Remarque : Les pièces contenues dans la livraison sont représentées
sur la couverture.
10 | Ottobock
Français