Installation Sequence Installing The Extension For Heating Circuits 2 And 3 - Viessmann VITOTRONIC 300 Installation And Service Instructions Manual

Installation sequence
Installing the extension for heating circuits 2 and 3
Only for Vitotronic 300, type CM1E
4x
Fig. 1
Installing the LON communication module
Fig. 2
Inserting the coding card
Only use the boiler coding card supplied with the
boiler.
18
Note
Extension connection for heating circuits 2 and 3: See
chapter "Connecting extension for heating circuits 2
and 3".
Parameters to be configured during initial start-up: See
chapter "Connecting the control unit to the LON".