Installation Sequence - Viessmann Vitoconnect OPTO2 Operating Instructions Manual

Overview of steps for installation and commissioning
Work steps
Installation
1 Check the system requirements.
2 Insert cables.
3 Install the wall bracket for the Vitoconnect.
4 Fit wall mounting bracket for Vitotrol 100.
5 Connect the Vitoconnect to the heat generator.
7 Connect Vitoconnect and Vitotrol 100.
8 Insert the Vitoconnect in the wall bracket.
9 Insert Vitotrol 100 into wall mounting bracket.
10 Set up the Vitoconnect mains connection.
Commissioning
11 Check the network settings.
12 Register the user. Set up the heating system.
13 Only in conjunction with an energy manage-
ment system:
Establish the connection to the energy manage-
ment system.
Responsible party
Contractor
IT professional
Contractor
System user
Contractor
System operator
Contractor
System operator
Contractor
Contractor
System user
Contractor
System operator
Contractor
System operator
Contractor
System operator
Contractor
System operator
IT professional
Contractor
System operator
Contractor

Installation sequence

Page
Type OPTO2 Type OT2
11
—
14
—
—
16
—
17
—
18
20
21
21
11
15
14
14
16
—
17
17
18
18
20
21
21
13