Viessmann System Number - Viessmann VITOTRONIC 300 Installation And Service Instructions Manual

General, Vitotronic 100

98 Viessmann system number

Display
1
Relevant system number
9C LON subscriber monitoring
Display
No monitoring
20 min
... min
Boiler, Vitotronic 100
Parameter values in bold are factory settings.
02 Burner type
!
Display
Single stage burner
Two-stage burner
Modulating burner
03 Boiler protection, gas/oil operation
Display
Gas operation
Oil operation
Resetting to gas not possible.
(cont.)
Value
98:1
98:1 to
98:5
Value
9C:0
9C:20
9C:1 to
9C:60
Value
02:0
02:1
02:2
!
Value
03:0
03:1
Parameters, Vitotronic 100
Explanations
Displayed only if parameter "76:1" has been set.
Note
Within one LON, the system number must always
■
be the same.
In conjunction with monitoring of several systems
■
via Vitocom 300, type LAN3
Explanations
Displayed only if parameter "76:1" has been set.
Note
To prevent fault messages, we recommend settings
greater than 5 minutes.
LON subscriber monitoring
If there is no response from a subscriber for 20 min,
the values specified in the control unit are used. Only
then will a fault message be issued.
Explanations
Explanations
105