9
Advance Function
9.1 Intercom
The equipment can answer intercom calls automatically.
Parameters
Enable Intercom Mute
Enable Intercom Ringing
9.2 MCAST
This feature allows user to make some kind of broadcast call to people who are in multicast
group. User can configure a multicast DSS Key on the phone, which allows user to send a Real
Time Transport Protocol (RTP) stream to the pre-configured multicast address without involving
SIP signaling. You can also configure the phone to receive an RTP stream from pre-configured
multicast listening address without involving SIP signaling. You can specify up to 10 multicast
listening addresses.
Picture 9 - WEB Intercom
Table 4 - Intercom
Description
Enable mute during intercom mode
If the incoming call is intercom call, the device plays the
intercom tone.
13