Appendix Table; Common Command Mode; Function Key Led State - Fanvil i16V User Manual

5.2

Appendix Table

5.2.1

Common command mode

Action
IP Broadcast under
standby mode
Switch network
mode
5.2.2

Function key LED state

Type
Speed dial
4
Table 1 - Common command mode
Description
In standby mode, long presse the speed dial button for 10
seconds, there will be a toot sound and the indicator light will flash
5 seconds, please press the speed dial button once within 5
seconds, the toot sound will stop automatically reporting IP
In standby mode, long press the speed dial button for 10 seconds,
there will be a toot sound and the indicator light will flash 5
seconds. Within 5 seconds, press the speed dial button three times
quickly to switch the network mode. Network state in static or
PPPoE mode will be switched to DHCP mode; If the network is in
DHCP mode, it will switch to static IP 192.168.1.128. IP will be
reported after successful switch
Table 2 - Function key LED state
LED
Normally on
Quick flashing
Slow flashing
State
Successfully registered
Registration failed/ network abnormal
In call