Leds; The Wps/Reset Button; Wps; Wps Button - ZyXEL Communications NBG-418N User Manual

1.3 LEDs

Figure 2 Front Panel
The following table describes the LEDs and the WPS button.
Table 1 Front Panel LEDs and WPS Button
LED
POWER
WAN
WLAN

WPS

1.4 The WPS/RESET Button

Your NBG-418N v2 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure
wireless network. WPS is an industry standard specification, defined by the Wi-Fi Alliance.
Chapter 1 Introduction
COLOR STATUS
Green On
Off
Green On
Blinking
Off
Green On
Blinking
Off
Green On
Blinking
Off
NBG-418N v2 User's Guide
DESCRIPTION
The NBG-418N v2 is receiving power and functioning properly.
The NBG-418N v2 is not receiving power.
The NBG-418N v2 has a successful 10/100MB WAN connection.
The NBG-418N v2 is sending/receiving data through the WAN.
The WAN connection is not ready, or has failed.
The NBG-418N v2 is ready, but is not sending/receiving data
through the wireless LAN.
The NBG-418N v2 is sending/receiving data through the wireless
LAN.
The NBG-418N v2 is negotiating a WPS connection with a wireless
client.
The wireless LAN is not ready or has failed.
WPS status is configured.
The NBG-418N v2 is negotiating a WPS connection with a wireless
client.
The WPS status is not configured or disabled.
13