Simons Voss Technologies SmartHandle AX Manual page 9

SmartHandle AX (Manual)
IMPORTANT
Failure of operation due to different discharged batteries
This product uses one or more batteries for power supply. The batteries are
discharged at approximately the same rate.
Always replace all batteries at the same time.

IMPORTANT
Interference to operation as a result of radio interference
This product may be subject to interference from electromagnetic fields.
Do not place the product directly next to devices that can cause

electromagnetic interference (switching power supplies!).
IMPORTANT
Communication interference due to metallic surfaces
This product communicates wirelessly. Metallic surfaces can significantly
reduce the reach of the product.
Do not place the product on metallic surfaces.

NOTE
Intended use
SimonsVoss-products are designed exclusively for opening and closing
doors and similar objects.
Do not use SimonsVoss products for any other purposes.

NOTE
Battery contact malfunction due to grease film
When touching batteries, leave a thin film of skin grease on the batteries.
This film deteriorates the contact between the electronics and the batter-
ies.
1. Do not touch the contacts of the new batteries with your hands.
2. Use clean and grease-free gloves.
3. General safety instructions
9 / 59