Simons Voss Technologies SmartHandle AX Manual page 44

12. Battery replacement
SmartHandle AX (Manual)
44 / 59
5. Push the end battery clip inwards, until is springs out.
IMPORTANT
Loss of the battery clip
The battery clip is stuck. If both ends of the clip are pushed inward together
at the same time and released from the holder, the battery clip can fall out.
1. Change first one side then the other.
2. Do not open both sides of the clip at the same time.
6. Remove the batteries.
7. Insert new batteries.
8. Push the end of the battery clip back in again.
9. Push the end of the battery clip down.
10. Push the end of the battery clip into the bracket provided.
11. Repeat with the other side.
12. Push the cover back on the SmartHandle AX.