Adaptec ANA-62000 User Manual page 94

DuraLAN Fast Ethernet NICs User's Guide
3
In the Subnet Mask field, type the subnet mask number.
4
Click Apply.
5
Repeat steps 1 through 4 for any other port or group.
6
Click OK when you are finished configuring all groups.
7
Restart your computer to complete the changes.
8
Click Yes at the message prompt to restart your computer.
9
Continue to Checking System Status on page 8-17.
Once Duralink64 Port Aggregation is installed, you may update
group and port configurations using the instructions in the
Modifying Groups section.
8-12