Selecting Options - Adaptec ANA-62000 User Manual

Selecting Options

This section provides the option you must choose in a given screen.
These screens vary depending on which NetWare Client32 package
you are using.
Screen
Name/Message
Client Installation
Driver Type
32-Bit Network Board
Drivers
When asked to insert
the NetWare Client32
for DOS/Windows
3.1x
32-bit disk
32-Bit Network Board
Drivers
Settings for Adaptec
DuraLAN Network
Adapter
Installing Duralink64 NetWare Client
Option
Choose either NetWare Client32 for DOS and
Windows 3.1x or IntranetWare
DOS/Windows for DOS/Windows.
Choose 32-Bit.
Choose User Specified 32 Bit Driver. Do not
choose Adaptec PCI Ethernet Driver Failover!
Insert the Duralan Driver for NetWare 4.
(disk 2 of 2), and then type a:\nwserver.
Choose Adaptec DuraLAN Network
Adapters.
Set IOMAP to 1.
Set Connection Type to Autodetect Default or
None.
X
12-3