Adaptec ANA-62000 User Manual page 150

DuraLAN Fast Ethernet NICs User's Guide
– If you are configuring IP:
a
In the List of Frame Types box, select the frame type,
and then press Enter.
Figure 11-26. List of Frame Types Box
b
In the IP Parameters box, select Enter IP Address, and
then press Enter.
Figure 11-27. IP Parameters Box
c
In the IP Address box, type the address number, and
then press Enter.
d
In the IP Parameters box, select Enter Subnet Mask, and
then press Enter.
e
In the IP Subnet Mask Number box, type the subnet
mask, and then press Enter.
f
Repeat steps a through e for each appropriate port or
group.
g
Press Esc twice to return to the List of Protocols box.
4
Repeat steps 2 and 3 for any other group or port you wish to
configure.
5
Press Esc to return to the Main Menu.
6
Continue to Verifying Configuration.
11-14
List of Frame Types
ETHERNET II
ETHERNET SNAP
IP Parameters
Enter IP Address
Enter Subnet Mask