Adaptec ANA-62000 User Manual page 149

3
In the List of Protocols box, select the protocol for the current
group/port, and then press Enter.
List of Protocols
IPX
IP
Figure 11-22. List of Protocols Box
– If you are configuring IPX:
a
In the List of Frame Types box, select the frame type,
and then press Enter.
List of Frame Types
ETHERNET 802.2
ETHERNET 802.3
ETHERNET II
ETHERNET SNAP
Figure 11-23. Marcom will be bound
with
b
In the IPX Network Number box, type a unique IPX
network number, and then press Enter.
IPX Network Number
121212121
Figure 11-24. Example of an IPX network number.
c
Repeat steps a and b for each frame type you wish to
use. A check indicates enabled frame types.
List of Frame Types
ETHERNET 802.2
ETHERNET 802.3
ETHERNET II
ETHERNET SNAP
Figure 11-25. Marcom and
d
Press Esc to return to the List of Protocols box.
Duralink64 Port Aggregation for NetWare
.
ETHERNET 802.2
ETHERNET_802.2
are bound.
11-13