Installing The Duralan Driver; Windows Nt 4.0 - Adaptec ANA-62000 User Manual

Installing the DuraLAN Driver

Windows NT 4.0

If you are installing Windows NT at this time, start with step 6 when
prompted for the DuraLAN NIC.
To install the DuraLAN driver on a Windows NT 4.0 platform follow
these steps:
1
Start Windows NT.
2
From the Start menu, point to Settings, and then click Control
Panel.
3
In the Control Panel, double-click Network.
4
In the Network window, click the Adapters tab.
5
In the Adapters tab, click Add.
6
In the Select Network Adapter window, click Have Disk.
Figure 5-1. Select Network Adapter
Duralink64 Driver Installation for Windows
5-3