Viewing The System Status - Adaptec ANA-62000 User Manual

DuraLAN Fast Ethernet NICs User's Guide

Viewing the System Status

After installing Duralink64 Failover through fosetsf, you can view
the system status. This program automatically opens whenever you
restart the server.
To manually enter status, at the system console prompt, type: load
status. TheDuralink64 Failover status screen appears.
Duralink64 Failover/Stand alone Status
Failover Pairs/Ports NIC
Adptsf3 ANA-62044
Adptsf4 ANA-62044
Adptsf5 ANA-62044
ANA-62044
Adptsf6
ANA-62044
Adptsf7
Adptsf8
ANA-62044
Marcom
> Adptsf1 ANA-62044
> Adptsf2 ANA-62044
< F1> Help
©
Copyright 1998, Adaptec Inc.
Figure 10-24. Duralink64 Failover Status Screen
Note: This requires that the Failover software be loaded or
an error will occur. If you have not rebooted since you
installed the software, reboot and the above screen will
appear automatically.
This module can be used to identify the physical ports by
determining the status when unplugging network connections.
10-14
Netware Loadable Module
Transmit Kbps Receive Kbps
10234 5250
0 0
12367 6150
0 0
10151 5045
8305 4055
5798 2708
0 0
<ESC> to Exit.
<F8> Refresh Interval
Server Name --> [NAME]
Status
ACTIVE
DOWN
ACTIVE
IDLE
ACTIVE
ACTIVE
ACTIVE
STANDBY