Cable Requirements - Adaptec ANA-62000 User Manual

Cable Requirements

Cable requirements for Adaptec DuraLAN NICs vary according to
network speed, cabling standard, and the connector to be used. The
table below identifies appropriate cabling, based on these variables.
The table applies to both Half Duplex and Full Duplex (for selected
models) environments.
NIC Connector
TX Adapters RJ-45
FX Adapters ST
SC
Cables and LEDs
10 Mbps 100 Mbps
CAT 3,4,5 CAT 5 UTP,
UTP
N/A 62.5/125
micron
multimode
fiber
N/A 62.5/125
micron
multimode
fiber
Cable
Pins Used
1,2,3, 6
N/A
N/A
A-3