Adaptec ANA-62000 User Manual page 126

DuraLAN Fast Ethernet NICs User's Guide
11
. To rename the default Failover pair name:
O
PTIONAL
a
From the Failover Pair Configuration menu, select Set
Failover Pair Name, and press Enter.
b
In the Failover Pair Name box, type the pair name, and then
press Enter.
List of Existing Pairs List of Existing
1
Figure 10-11. Failover Pair Box
List of Existing List of Existing Pairs
1
Figure 10-12. Pair Name Box
12
To review the ports assigned to the pair, select Display
Existing Ports from the Set Failover Pairs menu, and then
press Enter.
When you select Display Existing Ports, this box is
displayed as read-only.
Figure 10-13. Existing Ports Box
13
Press Esc until you return to the Main Menu.
14
To create more pairs, repeat Steps 1 through 13.
15
Continue to Assigning the Protocols.
10-8
Pair Name
pair1
pair1
Failover Pair Name
Pair Name
Marcom
Marcom
Existing Ports
1. Adptsf1
2. Adptsf2