Advertisement
Step 2: Inserting the Adapter
To successfully install your DuoConnect for Notebooks adapter:
1 Power on your computer, if you haven't already.
2 Disconnect any devices that are
connected to the adapter.
3 Carefully insert the adapter into the
CardBus slot of your computer, as
shown.
4 Insert the DuoConnect for Notebooks
CD into your CD-ROM drive if you
haven't done so already.
Step 3: Installing the Device Drivers
Follow the instructions for your operating system:
For Windows XP, see
For Windows 2000, see
For Windows Me, see
For Windows 98SE, see
Note:
For more detailed driver installation instructions, and for
instructions on verifying driver installation, refer to the User's
Guide on the DuoConnect for Notebooks CD.
page
6.
page
7.
page
8.
page
8.
5
Advertisement
