Technical Data - Hilti SF 2-A Manual

Other system products approved for use with this product can be found
at your local Hilti Store or online at: www.hilti.group.
4

Technical data

4.1 Technical data
Rated voltage
Weight
Speed in 1st gear
Speed in 2nd gear
Torque
Torque (drill symbol)
4.2 Battery
Battery operating voltage
Ambient temperature
Storage temperature
Charging temperature
4.3 Noise information and vibration values determined in accor-
dance with EN 60745
The sound pressure and vibration values given in these instructions were
measured in accordance with a standardized test and can be used to
compare one power tool with another.
preliminary assessment of exposure. The data given represents the main
applications of the power tool. However, if the power tool is used for different
applications, with different accessory tools, or is poorly maintained, the data
can vary. This can significantly increase exposure over the total working
period. An accurate estimation of exposure should also take into account
the times when the power tool is switched off, or when it is running but not
actually being used for a job. This can significantly reduce exposure over
the total working period. Identify additional safety measures to protect the
operator from the effects of noise and/or vibration, for example: maintaining
the power tool and accessory tools, keeping the hands warm, organization
of work patterns.
*2081398*
Printed: 15.03.2019 | Doc-Nr: PUB / 5174884 / 000 / 02
2081398
SF 2­A SFD 2-A
10.8 V 10.8 V
1.1 kg 1 kg
0 /min ... 0 /min ...
400 /min 400 /min
0 /min ... 0 /min ...
1,500 /min 1,500 /min
0 Nm ... 0 Nm ...
3.5 Nm 3.5 Nm
12 Nm 12 Nm
10.8 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 60 ℃
They can also be used for a
English 25