Technical Data - Hilti TE 60-A36 Manual

Status
1 LED lights.
1 LED blinks.
1 LED flashes, the product is not in working order.
4 LEDs flash, the product is not in working order.
Battery state of charge cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given in the Troubleshooting section.
3.8 Items supplied
Combihammer, side handle, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group | USA: www.hilti.com
4

Technical data

Rated voltage
Weight in accordance with EPTA procedure 01
Single impact energy in accordance with EPTA procedure 05
Hammer drill bits, Ø
Breach bits, Ø
Percussion core bits, Ø
PCM diamond core bits, Ø
Drill bits for metal, Ø
Drill bits for wood, Ø
Chuck
4.1 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This can significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values
Sound pressure level L
Uncertainty for the sound pressure level (KpA)
Sound power level L
WA
Uncertainty for the sound power level (KWA)
*2201898*
pA
2201898
Meaning
State of charge: 10 % to 25 %
State of charge: < 10 %
The battery has overheated or is completely dis-
charged.
The power tool is overloaded or has overheated.
TE 60-A36
36 V
8.1 kg
8.1 J
12 mm ... 55 mm
40 mm ... 80 mm
45 mm ... 100 mm
42 mm ... 102 mm
10 mm ... 20 mm
10 mm ... 32 mm
TE­Y
TE 60-A36
98 dB
3 dB
109 dB
3 dB
English 7