Technical Data - Hilti SFC 14-A Manual

Keyless chuck
@
Torque and drilling mode selector ring
;
2-speed gear selector switch
=
Forward / reverse selector switch with
%
safety lock
Control switch (with electronic speed
&
control)
Grip
(
Lamp
)
Belt hook (optional)
+
Release buttons with additional function
§
(charge status display activation)
Charge state and fault display (Li-ion
/
battery)
3.2 Intended use
The product described is a hand-held cordless drill/driver. It is designed for driving and removing screws
and for drilling in steel, wood and plastic.
▶ Use only Hilti Li­ion batteries of the B 14 and B22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3 Items supplied
Drill / driver, operating instructions.
• You can find other system products approved for use with your product at your local Hilti Center or
online at: www.hilti.group.
4

Technical data

4.1 Technical data
Rated voltage
Weight in accordance with EPTA procedure 01
Speed in 1st gear
Speed in 2nd gear
Torque (max.)
Torque range (15 settings)
4.2 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
8 English
Printed: 11.09.2018 | Doc-Nr: PUB / 5152681 / 000 / 04
SFC 14­A SFC 22­A
14.4 V 21.6 V
1.5 kg 1.7 kg
0 /min ... 500 /min 0 /min ... 600 /min
0 /min ... 0 /min ...
1,700 /min 1,800 /min
24 Nm 28 Nm
1.5 Nm ... 10 Nm 1.5 Nm ... 10 Nm