Hilti SF 2-A Manual page 28

2.2 Drill safety warnings
▶ Use auxiliary handle(s), if supplied with the tool. Loss of control can
cause personal injury.
▶ Hold power tool by insulated gripping surfaces, when performing an
operation where the cutting accessory may contact hidden wiring.
Cutting accessory contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an electric shock.
2.3 Drill/driver safety warnings
▶ Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
2.4 Additional safety instructions
Personal safety
▶ Tampering with or modification of the tool is not permitted.
▶ Keep the grips dry, clean and free from oil and grease.
▶ Improve the blood circulation in your fingers by relaxing your hands
and exercising your fingers during breaks between working.
▶ Do not look directly into the light source (LEDs) integrated in the
drill/driver and do not direct the light at other persons' faces. This
presents a risk of dazzling or eye damage.
▶ Avoid touching rotating parts. Switch the power tool on only after
bringing it into position at the workpiece. Touching rotating parts,
especially rotating drill bits or other accessory tools, may lead to injury.
▶ Wear protective gloves. The drill/driver may get hot during use. There is
a risk of injury (cutting or burning) if the accessory tool is touched while
changing it.
▶ Activate the safety lock (forward/reverse selector switch in the middle
position) when changing bits or batteries and before storage or trans-
portation of the power tool.
▶ The power tool is not intended for use by debilitated persons who
have received no special training. Keep the power tool out of reach
of children.
▶ Dust from materials, such as paint containing lead, some wood species,
concrete / masonry / stone containing silica, and minerals as well as
metal, may be harmful. Contact with or inhalation of the dust may cause
allergic reactions and/or respiratory or other diseases to the operator
or bystanders.
such as oak and beech dust, especially in conjunction with additives for
wood conditioning (chromate, wood preservative). Material containing
asbestos may be handled only by specialists. Use a dust removal
22 English
Printed: 15.03.2019 | Doc-Nr: PUB / 5174884 / 000 / 02
Certain kinds of dust are classified as carcinogenic
2081398
*2081398*