Technical Data - Hilti TE 2 Manual

Personal safety
▶ Wear protective gloves. The rotary hammer may get hot during use. There is a risk of injury (cutting or
burning) if the accessory tool is touched while changing it.
3 Description
3.1 Overview of the product
3.2 Intended use
The product described is an electrically powered rotary hammer. It is designed for drilling in concrete,
masonry, drywall / gypsum board, plastic, wood, metal and for driving and removing screws.
▶ The power tool may be operated only when connected to a power supply providing a voltage and
frequency in compliance with the information given on its type plate.
3.3 Items supplied
Rotary hammer, side handle, depth gauge, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group | USA: www.hilti.com
4

Technical data

For details of the rated voltage, current, frequency and/or input power, please refer to the power tool's
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
Weight in accordance with
EPTA procedure 01
Drilling diameter range in con-
crete/masonry (hammer drill
bit)
Drilling diameter
range in wood (solid)
Drilling diameter
range in metal
(solid-head drill bit)
Maximum length of the depth
gauge
*2059547*
1
@
;
=
%
&
(
)
+
§
/
:
∙
TE 2
2.7 kg
4 mm ... 22 mm
4 mm ... 20 mm
•/•
3 mm ... 13 mm
•/•
180 mm
2059547
Three-jaw chuck (TE 2-M)
Dust shield
Chuck
Chuck locking ring (TE 2-M)
Depth gauge
Function selector switch
Forward / reverse switch
Grip
Control switch
Lockbutton
Rating plate
Side handle
TE 2-S TE 2­M
2.7 kg 2.9 kg
4 mm ... 22 mm 4 mm ... 22 mm
4 mm ... 20 mm 10 mm ... 20 mm
•/• 4 mm ... 10 mm
3 mm ... 13 mm 8 mm ... 13 mm
•/• 3 mm ... 8 mm
180 mm 180 mm
English 5