Introduction; About This Guide - Extron electronics DTP CrossPoint 108 4K Setup Manual

Introduction

This section gives an overview of the Extron
DTP CrossPoint 4K Series matrix switchers and describes their
features. Topics that are covered include:

About this Guide

•
• About the DTP CrossPoint 4K Series
About this Guide
NOTE:
the DTP CrossPoint 4K Series User Guide and the IPCP Pro
Series User Guide, at www.extron.com.
This guide provides instructions for an experienced installer to
set up and operate the Extron DTP CrossPoint 4K Series matrix
switchers. Step by step instructions show you how to:
• Connect the hardware (see
• Perform basic operations from the front panel (see
Panel Operations
• Use selected SIS commands (see
Response Table for Matrix Switcher Commands
page 24)
• Load and start the control programs (see
Product Configuration Software
the DSP Configurator Program
• Connect to the built-in HTML pages (see
HTML
For more information on subjects in this guide, see
on page 17)
pages, on page 33)
DTP CrossPoint 4K Series • Introduction
Rear Panel
on page 4)
SIS Command and
Starting the
on page 30 and
on page 31)
Accessing the
Front
on
Starting
1