Accessing The Html Pages - Extron electronics DTP CrossPoint 108 4K Setup Manual

Accessing the HTML Pages

NOTES:
•
•
1.
Start the Web browser program.
NOTE:
2.
Click in the
3. Press the keyboard <
it is password-protected.
NOTE:
If the switcher is not password-protected, the switcher
displays the HTML start-up page. The switcher is ready for
operation via HTML remote control.
If the switcher is password-protected, the switcher displays
the
Figure 24.
If your Ethernet connection to the matrix switcher is
unstable, try turning off the proxy server in your Web
browser. In Microsoft Internet Explorer, click
Internet Options > Connections > LAN Settings
Use a proxy server
For details on operating the switcher via HTML
pages, see the "HTML Operation" section in the
DTP CrossPoint 4K Series User Guide.
For best results, Extron recommends the following
browsers and compatibility mode:
• Microsoft Internet Explorer, version 8.0 or newer, with
compatibility mode off
• Mozilla Firefox
®
• Google Chrome
• Apple Safari , version 4 or newer
® ®
Address
The factory configured passwords for all accounts
on this device have been set to the device serial number.
In the event of a complete system reset, the passwords
convert to the default, which is no password.
Authentication Required
Authentication Required Dialog Box
... box, and then click
, version 6 or newer
®
, version 9 or newer
™
field and enter the IP address.
> key. The switcher checks whether
Enter
dialog box (see figure 24).
DTP CrossPoint 4K Series • Remote Control
Tools >
, uncheck the
.
OK
33