Installing A New Power Supply Unit And Ac Inlet Accessory In An Empty Slot - HP Aruba 6400 Series Installation And Getting Started Manual

Installing a new power supply unit and AC inlet
accessory in an empty slot
Prerequisites
Mount the 6400 chassis in a rack or other location as described in Mounting the switch.
IMPORTANT: A C16 AC inlet accessory is shipped with the R0X35A Aruba 6400 1800W Power
Supply. A C20 AC inlet accessory is shipped with the Aruba 6400 3000W Power Supply. Using a
C16 AC inlet accessory with a 3000W power supply, or using a C20 AC inlet accessory with an
1800W power supply is not supported.
Procedure
1. If installed, remove the bezel from the front of the chassis to expose the four power supply slots.
68
1
1 2
2
3 4
Aruba 6400 Switch Series Installation and Getting Started
Guide