Table of Contents
Advertisement
3
4
5
Power cords, power inlet accessories, and power
supplies
Aruba includes the power cord approved for use with your Aruba switch and power supply. Different
countries/regions may require different power cords. For a list of the power cords approved for use with
your Aruba 6400 switch, see the section that lists power cords under Power cord information.
CAUTION: Only Aruba-approved power cords are supported for use with Aruba devices. Lost or
damaged power cords must be replaced only with Aruba-approved power cords. If your
installation requires a different power cord than the one supplied with the switch and/or power
supply, be sure that the cord is adequately sized for the current requirements of the switch. In
addition, be sure to use a power cord displaying the mark of the safety agency that defines the
regulations for power cords in your country or region. The mark is your assurance that the
power cord can be used safely with the switch and power supply.
WARNING: Do not use a damaged or non-recommended power cord with your switch. Using
such power cords voids the switch and power supply warranty. It can also cause serious
electrical problems, including injury or death to personnel, and damage to the switch and other
property. If you cannot verify that you have a power cord approved for use with your switch
model, contact your authorized Aruba dealer or sales representative for assistance.
WARNING: Remove the power cord from the switch and power supply before mounting or
dismounting the switch.
Power cord information
Japan power cord warning
1800W PSU C15 Power cord information
NOTE: : The R0X35A (1800W) PSU, when operating at high line (200-240 VAC), provides 1800W of
power. When operating at low line (110-127 VAC), the R0X35A provides 1100W of power.
Chapter 4 Introducing the Aruba 6400 switch series
Chassis health LED
Chassis identification (UID) LED
Fan tray status (1, 2)
35
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
