Figure 26 Removing an LSWM1BFANSC/LSWM1BFANSCB fan tray
Installing/removing a power supply
WARNING!
In power redundancy mode, you can replace a power supply without powering off the switch but must
•
strictly follow the installation and procedures in
damage to the switch.
Provide a separate circuit breaker for each power supply.
•
The switch comes with the power supply slots empty and filler panels for the power supply slots as
accessories.
For more information about the power supplies available for the switches, see
Figure 27 Installation procedure
Figure 28 Removal procedure
Turn off the circuit
breaker
Figure 27
Disconnect the power
cord
24
and
Figure 28
to avoid any bodily injury or
"Power
Remove the power
supply
supplies."