Four-Post Rack Mounting - HP Aruba 6400 Series Installation And Getting Started Manual

3.
4. Gently lower the switch so that the lower ends of the rack ears rest on the screws you installed in step 1.
5. Use the screws provided in the accessory kit to secure the chassis to the rack.
6. Go to Grounding the chassis.

Four-post rack mounting

WARNING: Mount devices installed in a rack or cabinet as low as possible. Mount the heaviest
devices at the bottom of the rack and lighter devices higher up.
Preparing the chassis for an optional four-post rack mount
To order the optional R0X37A Aruba four-post Rack Kit, contact your authorized Aruba product
representative. For the front posts, you will use the same rack ears that you received with your switch. For
the rear posts, you will use the contents of the four-post kit.
Chapter 6 Mounting the switch
WARNING: Before attempting to configure or use the switch, be sure to secure it to the rack
using the screws and rack mounting ears provided. Failure to secure the chassis and
supporting hardware could result in unexpected shifting or movement of the switch and risk
of personal injury or product damage.
Lock the lift wheels.
57